I’m trying to cross compile Qt 5.0.1 (latest release at the moment) for my Raspberry Pi. My set up is as follows:
Operating System: Ubuntu 12.04 32-bit
Cross compiler: Built from crosstool-NG program, using the exact instructions found here [bootc.net]
Raspberry Pi Operating System: Raspbian Wheezy 2013-02-09 (mounted at /mnt/raspberry-pi-rootfs)
Configure command:
./configure -no-pch -opengl es2 -device linux-rasp-pi-g++ -device-option CROSS_COMPILE=/home/<myusername>/x-tools/arm-unknown-linux-gnueabi/bin/arm-unknown-linux-gnueabi- -sysroot /mnt/raspberry-pi-rootfs -opensource -confirm-license -optimized-qmake -reduce-exports -release -make libs -prefix /usr/local/qt5-raspberry-pi -v
When I run the configure command, it always fails with the following error:
Could not determine the target architecture!
/mnt/raspberry-pi-rootfs/usr/include/features.h:323:26: fatal error: bits/predefs.h: No such file or directory
Anyone know what this means?
I have tried the latest pre-built Linaro Toolchain cross compiler from here [wiki.linaro.org], and Qt at least builds, but any program compiled with it causes SIGILL (illegal instruction) fault as soon as the program runs up, which I guess is because the pre-built cross compler I used is not targeting the right architecture.
Note:
I am aware cross compiling is fiendishly difficult, but I’d like to understand more about what is going on.
I have seen demonstrations of people cross compiling Qt 5 applications for Raspberry Pi, so I know it is possible, it is very frustrating to not be able to do it myself.
Does anyone have a working setup for cross compiling Qt 5 for Raspberry Pi?
↧